3003-H14 is the formability-first aluminum sheet alloy. It draws and bends with very little springback, welds cleanly, and accepts cosmetic finishes well. Common for decorative panels, kitchen and food equipment, and HVAC ducting.
Mechanical and physical properties
| Property | Value |
|---|---|
| Tensile strength | 150 MPa |
| Yield strength | 145 MPa |
| Elongation at break | 16% |
| Density | 2.73 g/cm³ |
| Modulus | 69 GPa |
| Min bend radius | 0.5× thickness |
Typical applications
- Decorative architectural panels.
- Kitchen and food-service equipment.
- HVAC ducting and ventilation parts.
- Light-duty enclosures and trim.
Related materials
Was this page helpful?
Can't find what you need? Contact our team for expert assistance with your manufacturing project.